Phone: (951) 824-1571
Networking Cable Management

Security Wire Management

An effective cable management system keeps your CCTV security cable organized, which helps make system maintenance easier. Security Savvy carries a wide assortment of wire management solutions from cable runway ladder racks and wire cable trays, to hanging hardware solutions. Our wire management solutions help organize and protect your security cabling by keeping it off the floor.

Cable ladder racks route cables along cable runways along ceilings, walls, and floors. They provide superior strength and support with less weight. This wire management solution is highly adaptable, adjusting to any room layout.

A popular wire management product Security Savvy offers is the 12' Xtender Pole™, Telescoping Extension Pole. It allows professional contractors to safely install ceiling hardware from the ground level. This cable management tool allows contractors to install j-hooks safely from the ground level without having to use a ladder or lift. It has an adapter system for installing different types of cord management hardware including: eye lag screws, ceiling wire, j-hooks, and jack chains.

Wire Cable Trays provide a supported bridge pathway for cable to travel across open areas. They are more dynamic than conduit systems, and are highly stable for installation in risers and plenums. Other hanging wire management options include j-hooks which can be ceiling or wall mounted. Our commercial grade j hooks have carrying capacities anywhere from 17 to up to 50 pounds.

A popular cable management item is the multi-purpose J-Hook, Standard Steel - 3/4" - 4". These steel J-Hooks are available in sizes ranging from size 12 to up to size 64. The ¾” J-hook supports up to a dozen pound weight capacity, while the 4” J-hook handles up to 50 pounds. It is an ideal solution for stress free cable support for above suspended ceilings, and below raised floors. It’s also great for the home garage and workshop. We have standard steel J-Hooks available in ¾”, 1 5/16”, 2”, and 4” sizes.

Other hanging cable management solutions we offer include: drive rings, angle clips, beam flange clips, pressed beam clamps, and rod couplers. These cable management options are great for low voltage communications cable. Heat shrink tubing can also be molded to just about any cable, protecting it from the environment.

If you have any questions, feel free to give us a call. (951) 824-1571

Products 1-12 of 225
Show
16" Plastic Adjustable Sno-Shoe with Aerial Mounting Bracket & Hardware

Price: $117.99
Availability: Min. Qty. Order
Item #: FB26-4617-16A

    Features

    • Prevents macrobends in fiber optic cable.
    • Stores slack cable in one location to reduce repair time.
    • Eliminates the need for costly slack storage vaults in the fiber plant.
    • Reduces operating costs. With all the different mounting options, it also allows for one slack storage device to be used throughout the entire system.
    • Establishes proper installation practices while insuring your installation is within telephone and utility regulations.
    • Solves spacing problems on the pole.
    • 20 year pro-rated warranty.
    24" Plastic Adjustable Sno-Shoe with Aerial Mounting Bracket & Hardware

    Price: $222.99
    Availability: Min. Qty. Order
    Item #: FB26-4421-24A

      Features

      • Prevents macrobends in fiber optic cable.
      • Stores slack cable in one location to reduce repair time.
      • Eliminates the need for costly slack storage vaults in the fiber plant.
      • Reduces operating costs. With all the different mounting options, it also allows for one slack storage device to be used throughout the entire system.
      • Establishes proper installation practices while insuring your installation is within telephone and utility regulations.
      • Solves spacing problems on the pole.
      • 20 year pro-rated warranty.
      16" Plastic Sno-Shoe with Arial Mounting Bracket & Hardware

      Price: $81.99-$91.99
      Availability: In Stock
      Item #: NPNB-712##K-16

        Features

        • The plastic material design makes the Sno-Shoe non-conductive.
        • Countersunk nut wells for easy one tool installation.
        • The captive design allows the installer to simply lay the cable in the trough, leaving both hands free to secure the cable to the unit.
        • The multiple slots allow you to secure the cable with either heavy duty tie wraps or stainless steel straps. These slots also allow you to secure additional cable to the unit in expansion situations without having to remove any of the previously installed cable from the unit and also allows for water and ice drainage.

        Benefits

        • Prevents microbends in fiber optic cable.
        • Provides consistency and regularity in fiber optic loops.
        • Solution to spacing problems on poles.
        • 20 year pro-rated warranty.
        21" Plastic Sno-Shoe with Arial Mounting Bracket & Hardware

        Price: $77.99-$108.99
        Availability: In Stock
        Item #: FB26-2606-21T

          Features

          • Compact design provides slack storage in compact areas.
          • The plastic material design makes the Sno-Shoe non-conductive.
          • Countersunk nut wells for easy one tool installation.
          • The captive design allows the installer to simply lay the cable in the trough, leaving both hands free to secure the cable to the unit.
          • The multiple slots allow you to secure the cable with either heavy duty tie wraps or stainless steel straps. These slots also allow you to secure additional cable to the unit in expansion situations without having to remove any of the previously installed cable from the unit and also allows for water and ice drainage.

          Benefits

          • Prevents microbends in fiber optic cable.
          • Provides consistency and regularity in fiber optic loops.
          • Solution to spacing problems on poles.
          • 20 year pro-rated warranty.
          White Pre-Adhesive Backed Latch Duct Raceway, 6 Feet Long

          Price: $7.02-$16.38
          Availability: In Stock
          Item #: RWD-####-W

            Architectural Latch Duct (MRM)

            • Architectural MultiRaceway holds communication cables to a 1 inch bend radius, thus maintaining end to end connectivity even when filled to capacity or pulled through the raceway.
            • Category 5, 5E and 6 1" bend radius compliant.
            • Fast mounting one piece design.
            • The MRM Series Latch Duct Raceway is an adhesive backed, highly flexible, one piece design that installs quickly and easily.
            • The one piece design constructed of 94V-O rigid vinyl features a highly flexible hinge and self-locking latch.
            • This can be easily accessed as many times as necessary without stress cracking or discoloration.
            10" Plastic Sno-Shoe with Arial Mounting Tap Bracket & Hardware

            Price: $76.99-$82.99
            Availability: Min. Qty. Order
            Item #: NPNB-712##K-10

              Features

              • The plastic material design makes the Sno-Shoe non-conductive and smooth to avoid sharp edges that would cause cable damage.
              • Countersunk nut wells for easy one tool installation.
              • The captive design allows the installer to simply lay the cable in the trough, leaving both hands free to secure the cable to the unit.
              • The multiple slots allow you to secure the cable with either heavy duty tie wraps or stainless steel straps. These slots also allow you to secure additional cable to the unit in expansion situations without having to remove any of the previously installed cable from the unit and also allows for water and ice drainage.

              Benefits

              • Prevents micro bends in fiber optic cable.
              • Provides consistency and regularity in fiber optic loops.
              • Solution to spacing problems on poles.
              • 20 year pro-rated warranty.
              12 Xtender Pole™, Telescoping Extension Pole

              Price: $224.50
              Availability: In Stock
              Item #: JH-4480-12

                Features

                • Install Hanging Hardware From Work Floor - Improves Safety and Efficiency
                • All-In-One Adapter System for Threaded Rod, Eye Lag Screws, Wire Jack Chain
                • Install Multiple Fastener Types to a Variety of Ceiling Structures - Elco®, Hanger Mate®, Buildex Sammy Super Screws®, Powers Vertigo™
                • Powered With Any 3/8
                • Includes Female Hex Adapter for 1/4" Male Driver
                • Tips & Instruction Booklet
                • Xtender Pole™-12 (Three 4' Sections, Ceilings up to 18') P/N JH-4480-12
                • Hang Ceiling Wire (12 Or 9 Gauge) Install up to 100 Ceiling Wires Per Hour
                • Hang Threaded Rod 3/8" or 1/4" Rod up to 10 Feet Long
                • Overhead Screw Installation Transforms Into a Very Long Screwdriver
                • Hang Jack Chain Easily From The Work Floor
                • Hang Wire & Clip Assemblies Eye Lag Screws, Hangers, Multipurpose Clips
                E-Bend Cable Ladder Rack, 90 Degree

                Price: $147.60-$159.62
                Availability: In Stock
                Item #: LR-D17-####-L90

                  Features

                  • Build Your Own Cable Management System - We offer a wide variety of DAMAC Ladder Racks and accessories to offer you total freedom to customize and build around any obstacle for any situation.
                  • Keep Cables Safe - These Runways are sturdy and will prevent cables from getting tangled or kinked.
                  • Easy Access to Equipment - By utilizing runways it provides you with easier access to equipment by routing cables above and away from equipment.
                  • Stay Organized - Organizing and protecting your connections is essential for maintaining a efficient network station.
                  • Made in the U.S.A. - All DAMAC products are manufactured and distributed right out of La Mirada California.
                  Inside Radius Bend Cable Ladder Rack

                  Price: $147.60-$159.62
                  Availability: In Stock
                  Item #: LR-D17-####-RBI

                    Features

                    • Build Your Own Cable Management System - We offer a wide variety of DAMAC Ladder Racks and accessories to offer you total freedom to customize and build around any obstacle for any situation.
                    • Keep Cables Safe - These Runways are sturdy and will prevent cables from getting tangled or kinked.
                    • Easy Access to Equipment - By utilizing runways it provides you with easier access to equipment by routing cables above and away from equipment.
                    • Stay Organized - Organizing and protecting your connections is essential for maintaining a efficient network station.
                    • Made in the U.S.A. - All DAMAC products are manufactured and distributed right out of La Mirada California.
                    Outside Radius Bend Cable Ladder Rack

                    Price: $147.60-$159.62
                    Availability: In Stock
                    Item #: LR-D17-####-RBO

                      Features

                      • Build Your Own Cable Management System - We offer a wide variety of DAMAC Ladder Racks and accessories to offer you total freedom to customize and build around any obstacle for any situation.
                      • Keep Cables Safe - These Runways are sturdy and will prevent cables from getting tangled or kinked.
                      • Easy Access to Equipment - By utilizing runways it provides you with easier access to equipment by routing cables above and away from equipment.
                      • Stay Organized - Organizing and protecting your connections is essential for maintaining a efficient network station.
                      • Made in the U.S.A. - All DAMAC products are manufactured and distributed right out of La Mirada California.
                      Cable Ladder Rack, 5 x 12"

                      Price: $59.62-$79.33
                      Availability: In Stock
                      Item #: LR-D17-####-LR

                        Features

                        • Build Your Own Cable Management System - With DAMAC's wide variety of Ladder racks and accessories, it offers total freedom to customize and build around any obstacle for any situation.
                        • Keep Cables Safe - These Runways are sturdy and will prevent cables from getting tangled or kinked.
                        • Easy Access to Equipment - By utilizing runways it provides easier access to equipment by routing cables above and away from the equipment.
                        • Stay Organized - Organizing and protecting your connections are essential for maintaining an efficient network station.