Phone: (951) 824-1571

4 Post Server Rack, Open Frame Rack Systems

For a cost effective yet heavy duty network server rack, the 4 post server rack is just the solution. The 4 post server rack is an open frame system, providing superior airflow to system components. The square tube design of our 4 post server racks make equipment easily accessible. It also offers unparalleled versatility, as it can be easily expanded and adjusted to meet your requirements.

The Network Rack, Open Frame, 4 Post Double-Sided, Cage-Nut Rails, 45U boasts the superior strength and flexibility of a cabinet, only with an open frame design. This 4 post server rack is extremely durable, supporting a weight capacity up to 2,000 pounds. It has double sided RMU markings on both sides of mounting rails and cable management mounting holes in the side channels. The open frame design of this 4 post server rack enhances airflow and provides flexible cabling and equipment setup.

Security Savvy provides 4 post server racks in 41U and 45U sizes. Our 4 post server racks are manufactured in America out of 14 gauge steel, and coated in a black epoxy powder-coat finish.

Add versatility to your network with Security Savvy’s Network Rack, Open Frame Conversion Kit, 2 to 4 Post. This conversion kit is one of the most handiest bracing systems for 2 post racks. It not only secures a server rack to a wall, but also provides a measure of earthquake safety, keeping network equipment from falling over. This kit allows you to create a 4 post rack from two 2 post racks. It is also adjustable from 20” to 35.”

Security Savvy offers complete networking options for your commercial or home office data network. Our CAT 5E Patch Panels allow you to consolidate network connections in one area. We have high density patch panels to make the most efficient use of limited space. We also carry shielded patch panels for when maximum signal clarity is a concern. Our patch panels are available in 12, 24, 48, and 96 port configurations.

Security Savvy is an end-to-end provider of networking cable, server racks, and tools to get the project done on time and under budget. Don’t see what you’re looking for? Give us a call and our experienced technicians will assist you with whatever you require. Thank you for visiting our site.

If you have any questions, feel free to give us a call. (951) 824-1571

Products 1-6 of 6
Show
Network Rack, Open Frame, 4 Post Double-Sided, Cage-Nut Rails, 45U, 29” Depth

Price: $653.00-$699.90
Availability: In Stock
Item #: OF-D9-####-CN

    Features

    • Weight capacity 2000 lbs.
    • 12-24 Tapped Model: 6061-T6 aluminum extrusion
    • M6 Cage-Nut Model: 14 gauge steel
    • 19" rack-mount width
    • Two sets of mounting rails w/ EIA spacing: 5/8 x 5/8 x 1/2
    • 12-24 threaded or cage-nut mounting provisions
    • Mounting rails are tapped on both sides
    • Double-sided RMU markings on both sides of mounting rails
    • Side channels include cable manager mounting holes
    • ULTM Listed
    • UPS or FedEx shippable
    • Easily assembled, hardware included
    • Black epoxy powder-coat finish

    Applications

    • Government
    • Military
    • Seismic Prone Locations
    • Mission Critical Services
    • Telecommunications
    Kendal Howard 24U 4-Post Adjustable Rack - Front View

    Retail: $460.00
    Price: $396.31
    Availability: Call For Shipping
    Item #: NPNB-1940-3-100-24

      Features

      • Adjustable Rack - The 4-Post Adjustable Rack can adjust its usable depth from 26” to 38” so it can be used in multiple network installations.
      • Durability - The 4-Post Adjustable Rack’s welded L bracket base and cold rolled steel design forms a sturdy, reliable rack. Floor mounting holes are available to secure the rack to the floor for maximum durability. We always recommend installing your heaviest equipment at the lowest points on the rack.
      • Gangable - Ganging holes on both sides of the rack make it easy to gang and secure multiple racks together. The sides also feature cable pass through holes to allow cabling to pass from one rack to the next.
      • Electrical Grounding - The rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails. These studs allow you to ground your equipment directly to the stud or with the use of bus bars, not included. The rack also includes serrated tooth washers to allow the frame to be grounded during the assembly process.
      • Open Top Design - The 4-Post Adjustable Rack’s completely open top allows for smaller trunk cabling, and makes the rack compatible with most ladder racks and accessories
      Kendal Howard 45U 4-Post Adjustable Rack - Front View

      Retail: $601.00
      Price: $517.78
      Availability: Call For Shipping
      Item #: NPNB-1940-3-100-45

        Features

        • Adjustable Rack - The 4-Post Adjustable Rack can adjust its usable depth from 26” to 38” so it can be used in multiple network installations.
        • Durability - The 4-Post Adjustable Rack’s welded L bracket base and cold rolled steel design forms a sturdy, reliable rack. Floor mounting holes are available to secure the rack to the floor for maximum durability. We always recommend installing your heaviest equipment at the lowest points on the rack.
        • Gangable - Ganging holes on both sides of the rack make it easy to gang and secure multiple racks together. The sides also feature cable pass through holes to allow cabling to pass from one rack to the next.
        • Electrical Grounding - The rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails. These studs allow you to ground your equipment directly to the stud or with the use of bus bars, not included. The rack also includes serrated tooth washers to allow the frame to be grounded during the assembly process.
        • Open Top Design - The 4-Post Adjustable Rack’s completely open top allows for smaller trunk cabling, and makes the rack compatible with most ladder racks and accessories
        Network Rack, Knockdown Open Frame, 4 Post, Adjustable Rails, 41U

        Retail: $626.00
        Price: $539.32
        Availability: In Stock
        Item #: OF-K9-3333-41U

          Features

          • Mount More Rails - Most 4-post racks allow for only two sets of vertical rails to be mounted to the rack. With our design, you can add a third set of rails and mount equipment that has different mounting depths in the same rack.
          • Ships in Knockdown Position - The rack’s knockdown design allows us to ship the product as a small package keeping our shipping costs low and allowing the package to ship to almost anywhere in the world next day.
          • Easy to Install - Levelers are included to make installation quick and easy. To make the unit mobile, casters are available and can be installed onto the open frame rack.
          Network Rack, Open Frame Conversion Kit, 2 to 4 Post, 2-Piece

          Price: $67.20-$114.58
          Availability: In Stock
          Item #: TR-K8-####-OFCK

            Features

            • Adjustable Depth - Each support bracket can adjust from 20" to 35" deep to suit your particular installation requirements.
            • Added Support - This easy to use bracket system adds strength and stability to any 2-post Telco rack. Whether anchoring two racks together or bracing them to a wall, the Kendall Howard Conversion Kit will provide a safer, more dependable solution. The 4-piece option will convert two 2-post racks into one 4-post rack.
            • Great Cable Lacing Option - These horizontal brackets provide a great option for securing heavy and obtrusive trunk cabling up and out of the way.
            • Only Uses 2U of Space - The support braces mount directly on to the vertical rack rails with standard rack hardware. Each brace requires only 2U of rack space leaving you plenty of room for your network, A/V, and other rackmount equipment.
            Concrete Floor Mounting Kit for Equipment Racks

            Price: $40.87
            Availability: In Stock
            Item #: RA-D18-4838-FK

              Features

              • Lock Washers - these washers are split at one point and bent into a helical shape. This causes the washer to exert a spring force creating more friction and resistance for rotation.
              • Drop-in anchors - consists of a zinc plated steel tubular expansion shield and a solid, cone-shaped expander plug. These anchors are internally threaded assuring easy and safe fastening.
              • Superior Manufacturing - The carbon steel construction is manufactured in the U.S.A and produces a high-quality Zinc finish with excellent dimensional stability.