Phone: (951) 824-1571

Rackmount Fans

Both industrial size networks and small home office networks require system cooling solutions. Adequate cooling units such as rack fans are critical for dissipating heat buildup inside server cabinets. When considering rack fans for your server cabinets, it is essential to consider cost effective options.

Security Savvy’s Network Rack Fan Assembly Kit includes a 4” 78 CFM ultra quiet rack fan with power cord, fan guard, and installation hardware. This rack fan is a must have for any wallmount cabinet or enclosed server rack. It is impedance protected and RoHS compliant.

For larger server racks, our 3U Triple Fan Panel has three 105 CFM ultra quiet rack fans all installed in a 3U panel. Mount the panel to the front or rear vertical rails of any 19” EIA compliant rack. Each one of these rack fans is rated at 49 dBA. This high volume fan panel moves 345 cubic feet of air per minute with a specially designed cord powering all three fans.

Security Savvy carries a wide selection of server rack enclosures like the 42U Server Rack Enclosure. This K1 series rack mount server enclosure is perfect for low heat applications like servers, switching banks, telephony, and A/V equipment. Each rack has two sets of vertical rails adjustable in one inch increments. This type of server cabinet is also available in 22U, 27U, 37U, and 42U sizes.

If you have any questions, feel free to give us a call. (951) 824-1571

Products 1-7 of 7
Show
Network Rack, Low Noise Fan Kit, Two Fans

Price: $188.46
Availability: In Stock
Item #: RS-D13-4789-F2

    Features

    • Easy to Install - The DAMAC Fan Assembly Kit is a snap to install. Simply use the included hardware to screw into place. The fan also includes airflow and rotation guides to ensure proper installation.
    • Compatibility - Whether you need to cool a wall mount cabinet, full size enclosure, DVR lock box or training table cable management enclosure, this fan assembly kit will get the job done.
    • Made in the U.S.A. - DAMAC manufactures and distributes all of it's products straight out of La Mirada, California.
    Network Rack, NEMA Fan Filter Kit

    Price: $21.15
    Availability: In Stock
    Item #: RS-D13-4787-FF

      Features

      • Easy to Install - The guard has four holes which can be screwed onto any cooling fan with a 120 millimeter square frame. The retainer can be easily clipped on and off the guard to reach the filter piece for cleaning.
      • Keep Equipment Clean - The fan filter prevents up to 90% of dust particles from passing through the fan. Fans typically move large volumes of air which contain traces of dust. The filter reduces dust from accumulating on the fan and in the area the fan was blowing at.
      • Made in the U.S.A. - Damac manufactures and distributes all of it's products straight out of La Mirada, California.
      Network Rack, Fan Assembly Kit

      Retail: $51.00
      Price: $43.94
      Availability: In Stock
      Item #: RS-K13-3381-FAK

        Features

        • All-in-One - The fan assembly kit comes complete with one 115V / 78 CFM fan, one protective grate, one 6 ft. NEMA 1-15 power cord, and all installation hardware.
        • Easy to Install - The Kendall Howard Fan Assembly Kit is a snap to install. Simply use the included hardware to screw into place. The fan also includes airflow and rotation guides to ensure proper installation.
        • Compatibility - The standard 4" fan complements all Kendall Howard cabinets and enclosures. Whether you need to cool a wall mount cabinet, full size enclosure, DVR lock box or training table cable management enclosure, this fan assembly kit will get the job done.
        • Optional Grounding - Server rack fan features two threaded grounding holes should you need to ground the fan for your particular installation.
        Network Rack, Fan Thermostat

        Price: $65.38
        Availability: In Stock
        Item #: RS-D13-4790-TF

          Features

          • Easy Installation - The DAMAC Fan Thermostat is a snap to install. Simply use the included hardware to screw into place. The fan also includes airflow and rotation guides to ensure proper installation.
          • STEGOFIX Mounting - Equipped with STEGOFIX mounting bracket fan thermostats can be mounted in enclosures significantly quicker, easier and more economically than before, all without drilling holes.
          • Keep Equipment Cool - With detection capabilities for heat up to 140°F this thermostat will keep equipment safe and cool.
          • Made in the U.S.A. - DAMAC manufactures and distributes all of it's products straight out of La Mirada, California.
          Network Rack, Four 120mm AC Fans with Thermostat, 1U

          Price: $149.99
          Availability: In Stock
          Item #: NPNB-SA-3841

            Features

            • 1U fan unit with thermostat
            • Four 120mm AC fans
            Network Rack, High Speed Fan Assembly Kit

            Retail: $58.00
            Price: $49.97
            Availability: In Stock
            Item #: NPNB-1908-4-001-01

              Features

              • All-in-One - The fan assembly kit comes complete with one 115V / 115 CFM fan, one protective grate, one 6 ft. NEMA 1-15 power cord, and all installation hardware.
              • Easy to Install - The Kendall Howard Fan Assembly Kit is a snap to install. Simply use the included hardware to screw into place. The fan also includes airflow and rotation guides to ensure proper installation.
              • Compatibility - The standard 4" fan complements all Kendall Howard cabinets and enclosures. Whether you need to cool a wall mount cabinet, full size enclosure, DVR lock box or training table cable management enclosure, this fan assembly kit will get the job done.
              • Optional Grounding - Server rack fan features two threaded grounding holes should you need to ground the fan for your particular installation.
              Network Rack, Triple Fan Panel, 3U

              Retail: $187.00
              Price: $161.11
              Availability: In Stock
              Item #: RS-K13-3382-TFP

                Features

                • Pre-Assembled - The three 115 CFM high speed fans are pre-installed into a 3U heavy gauge steel panel to provide an out-of-the-box solution. The vented steel panel allows air to move through it with ease while also providing a protective barrier over the face of the fan.
                • Easy to Install - Rack mountable panel easily mounts in any 19” EIA compliant rack or cabinet. Simply mount using rack screws (and cage nuts if needed) and plug it in to start moving air within your rack configuration.
                • Specially Designed Power Cord - The Triple Fan Panel includes a 3-tail power cord. This power cable supplies power to all three fans with only using one outlet of your rack mountable UPS or power strip.
                • Optional Grounding - Each cooling fan features four threaded ground holes for grounding each fan in installation where specific electrical or network configurations require it.